Three Column Stone Display Rack for Showrooms

A three column stone display rack runs three rows of dense wire hooks up a floor frame with a rear leg. Thin chips hang in a tight grid, so one rack reads like a color chart. KERRY DISPLAY builds it in seamless steel with a baking paint finish. Also, the open grid keeps the wall behind it visible.

Product Details

The panels below show the hooks, the rear leg, and the finish of this three column stone display rack. It stands 1890 × 520 × 880 mm. Every unit ships fully welded, so showrooms can repeat it across a row with no visible difference. Send us your sample size and we set the hook pitch to match. Also, we share a drawing before production starts.

Why Choose This Three Column Stone Display Rack

Thin chips slip and stack badly on shelves. This three column stone display rack hangs each one on its own hook, so the grid stays square and clients read the range at a glance. Thus no one lifts a board to see the one behind it. Also, three columns triple the count without tripling the width. Because the rear leg props the frame, the rack stands free of the wall. Still, it holds about 48 samples in one run. So a single unit covers a whole collection.

Built for Stone, Tile and Wood

The hooks grip marble chips, granite offcuts, quartz squares, mosaic sheets, and thin porcelain tile. Wood flooring samples hang just as well, so one rack covers your full range. Slip each chip onto a hook and it sits flat against the grid. For a smaller hook unit at desk height, our stone sample display rack gives you the same logic on a compact frame. Also, mixed sizes share the grid without adapters. Heavy chips need a thicker hook, so tell us the weight and we set the gauge. Then the hook pitch follows your sample width.

Finishes

White baking paint wraps the seamless steel frame. White lifts dark stone and keeps the eye on the material. The coat cures hard, so daily handling leaves no mark. Also, we match any RAL color from 50 units.

Care and Maintenance

Also, care stays simple on this three column stone display rack. First, wipe the frame with a damp cloth. Then lift chips off their hooks when you clean the grid. Because the hooks are welded in place, none bend out of line over time. Thus one staff member resets the rack in minutes. Yet the baked finish resists chips, so one light cloth is enough. Still, check the rear leg once a season.

Showroom Layout Ideas

Line two racks along one wall to build a chip library. Also, place one near the desk, so clients browse while you write the quote. Then add more as the collection grows. For a wider three-column layout nearby, KYdisplay shows a matching mosaic tile display stand. So the floor stays open and calm.

Production and Delivery

KERRY DISPLAY builds each three column stone display rack to order. First, the steel frame goes through a square check. Then the baking paint cures hard in our booth. So the rack arrives clean and ready. Also, OEM branding runs from 50 units, and we pack flat to cut freight cost.

FAQ

How many samples does it hold?

About 48 chips across three hook columns, based on size. Send us your dimensions for an exact count.

Can I change the column count?

Yes. We build two, three, or four columns, so the grid matches your range and your wall.

Does it need wall anchoring?

No. The rear leg and weighted base keep the frame steady when you load it evenly.